Viton o rings, also called FKM o-ring, FPM o-ring, Flurocarbon o-ring.
FKM rubber o ring is widely used in all kinds of oil resistance, abration resisitance, high temperature resistance, acid and alkali resistant environment.
For mold viton fluorocarbong o ring,
Common performance are:
Temperature can be -22 to 392℉.
Minimum tensile strength can be 9.3 to 16.2 Mpa.
Minimum elongation 135% to 495%.
Max compression set can be 11% to 22% under 250℃@22hrs test condition.
With plenty experience is rubber filed, our engineering can adjust the formula to special demand such as above performance.
For example, temperature resistance can be -40 to 550℉.
Our viton grades can be FDA, internal lubrication, flame retardant V0.
Video Description |
Product Details |
Description |
Viton rubber o rings |
Material |
Viton/ FKM/ FPM |
Compound material |
Meet ASTM D2000 and can be UL, FDA, ROSH, REACH compliance |
Hardness |
From 50 ~ 90 shore A |
Color |
Customized |
Size |
All AS568, metric to non-standard size |
Package |
Plastic bag, Carton |
Leadtime |
8 days for sample, 12~18 days for mass product |
Advantage |
Smooth surface with small parting line Less or without burrs/ flashes |
From below you will know our nbr rubber seal o-ring is more than worth what you paid. |
All of our NBR ring are made of brand material. |
FAQ |
Q 1: How to select the raw compound for my application?
A: With 20 years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 2: What is the life expectancy of your rubber fkm o-ring?
A: Product life is contingent upon many factors, including environment, cycles, pressure and son on, fkm oring cannot predict seal life under all the varying conditions of operation. Accellerated life testing may be performed by customer to determine expected life, but must be conducted in dynamic application.
Q 3: How does Xiamen Best Seal control quality?
A: inspection process for conventional standard:
during production, check half an hour a time
inspection after integral molding, deburr
full inspection
random inspection
after second vulcanization, make full inspection again before shipment.
Q 4: How many employees you have?
A:We have 130 employees at time of December 2016.
Q 5: How many shifts per day in the factory?
A: Two shifts per day, 10 hours per shift.
http://www.xmbestseal.com/